TCP Mastik Silicone Sealant

Use TCP Mastik Sealant to fill all joints between door and wall or window and wall; also fill or seal wall cracks
Properties:
Easy to apply
Resistant to ozone
Ultra-violet radiation and temperature extremes
Excellent adhesion
Application:
Conact area must be dry, clean, free from dust, oil and grease.
Ensure neat sealant edges mask the areas adjacent to join with Masking tape.
Cut the tip of cartridge with angle in accordance with size of the surface to be applied on.
Place cartirage in the gun and inject the joint with selant.
The applied sealent should be smoothed immediately with a spatula, tool or finger.Remove masking tape right after smoothing.
Paint after the sealant properly dries
SPREADING RATE (for one coat):
Direct contact of uncured silicont sealant irritates eyes and may irritate skin.
Over exposure to vaor may irritate eyes, nose and throat.
Avoid eye and skin contact
Use with adequate ventilation
Keep out of reach of children!
Keep out of freezing
Storage:
It should be stored in dry, ventilated place, unopened pcking at temprature between +5 and +25C